Water Damage Restoration – What Exactly Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the home could be as a result of an overflow, flood or any other water damage and mold event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are 2 large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and also the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage due to water guide is the benchmark tool that is used by companies that specialize in restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the foremost and the most significant step in water damage restoration. The assessment has to be correct to ensure that the right response can be used. In restorating the damage caused by water, technicians and also the insurance providers must work together and know very well what is damaged and how to make restoring the damage. Identifying the source from the damage, documentation of damage, and accurate estimates are mandatory for any proper water damage restoration. Categorization is situated on the contamination amounts of the water source. The categories are highlighted below
Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This really is water which has some contaminants like water from a dishwasher, washing machine or toilet with urine.
Category 3 – This can be water that is highly unsanitary and is capable of doing causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a handful of examples.
Decontamination and Drying – After the evaluation is finished, the whole process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused because of water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and less water continues to be absorbed by materials. This leads to slow evaporation rate. Class 2 Damage – If the damage is to the entire room and carpet area. Class 3 Damage – Once the entire area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is a key stage in Water damage and mold restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination must be done if contamination has become detected in the community. Decontamination may be performed for the whole area or in specific pockets where contamination has become detected.
Monitoring and Completion – Monitoring the restoration procedure of damage caused due to damage is critical to get the desired results. One must be proactive during the monitoring process. Checking in the event the drying tools are setup properly, assessing when the personnel involved are qualified to do the job and checking if the equipments have been in working order inwtsy all area of the monitoring process. Necessary steps have to be taken if anything wrong is spotted throughout the monitoring process. The complete process of water damage and mold restoration would be considered complete just once the humidity, temperature and the moisture content is just as per industry standards. Upon finishing of the water damage restoration process, the drying equipment can be removed.