Actually, this is a good question, and while I have written a lot on this topic, I enjoy continuing to do so because it keeps me sharp and learning more about dye sub printing and new developments within this arena of printing, that has some similarities to coffee printer, and some significant differences.
An inkjet printer inside our business is typically at least 30 inches wide, but go up over sixteen feet in width, and these bring dye sublimation printers as well, however, not generally interchangeably without flushing feed lines and some other technical “fixes” that need to be done before having the capacity to convert from one kind of ink to some dye ink set.
To begin with, CMYK or four color process printing finished with ink upon an computer printer actually uses the 4CP ink set CMYK (short version of cyan-magenta-yellow-black), as opposed to the dye set used when printing when preparing for dye sub printing. The dye set is termed CMYO, that is short for cyan-magenta-yellow-overprint clear, where dye is printed to some treated transfer paper, as well as in the warmth transfer process becomes the black color.
So, first, without a doubt what dye sublimation printers usually are not used for. They are not employed for natural fiber fabrics like cotton, linen, or bamboo. They are also not employed for direct to fabric printing or precisely what is erroneously called direct sublimation printing, that is really inkjet to fabric printing, or DTF (direct-to-fabric) printing (another term is DTS, or direct-to-substrate).
Dye sublimation is normally not used for materials like PVC (vinyl) decal stock or banner materials, as led uv printer works fine being a surface print for these particular materials. Dye sublimation is usually not utilized for rigid plastics like styrene or polyethylene as flatbed digital UV printing is mostly utilized for this type of printing. Other rigids like MDO plywood or heavier plastics can also be printed on the flatbed UV inkjet digital printers.
What dye sublimation can be used for. With a special polymeric coating, there are numerous items that can be printed with all the dye sub print process such as cups, metal or perhaps wood plaques and awards, or another type that mtyrxw be inserted right into a flatbed heated press.
And, needless to say, fabric. Polymer-based fabrics like nylon or polyester can be printed using dye sublimation heat transfer through the treated transfer paper by printing a mirror image on the paper, matching it towards the fabric, and sending it through heated pressure rollers. This process, like the flat press described above, converts the dye in to a gaseous state and impregnates the warmth-opened polymer cells with color, which, after the heat and pressure are gone, close in across the dye, leaving the color permanently included in the fabric. This not merely creates durable color, dtg printer also creates almost photographic quality continuous tones which can be brighter and more colorful than an printing device can normally achieve.
The printed fabrics may be used on X-banner stands, L-banner stands, Retractable or Adjustable banner stands, feather banners, blade banners, pop-up banner displays, teardrop banners, trade show displays, retail displays, hanging banner systems, garments, and anything else imaginable that is made from fabric in the commercial or non-commercial realm.