High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is really a challenging issue for owners. From the desired temperature to their favorite light level, guests will probably return for another stay when they can customize their room to match their preferences. However, providing these features using old technology wastes a lot of energy. As an example, there are tons of difficulties with the old card key switches. Guests can put any card in the old switches, or they might ask for more than one card. Even if hotel desk refuses to provide more than one card to a guest, she/he might claim to have lost the card.
The traditional old technology of hotel card switch. Additionally there is a large amount of over consumption of lights and AC energy because of things running even if guests aren’t in their rooms, and this could cause a monetary loss for the owner. Of course, no hotel owner wants to prohibit guests from possessing a comfortable stay, nor do owners expect guests to get in a dark or cold hotel. No one is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think if they separate the AC through the main network, less energy is going to be consumed, while some feel that motion sensors would be the solution. However, these approaches fail to resolve the situation. The AC is easily the most energy-consuming device of, and motion sensors could be nightmares since they only function based upon movement detection, which means the AC and lights might go off while a guest is sleeping or reading a magazine. Nightmarish!
The TIS Automation Company supplies the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its ability to detect human presence in a room. This ceiling-mounted sensor has many options, including a PIR motion sensor, a mild harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the new means for hotel energy saving technology. By installing this door sensor in the entrance to some room, connecting it for the Energy Servant’s digital input, and programming the logic lines, the problem of room occupancy is completely resolved.
These logics could be defined for this sensor to control room energy without the discomfort for guests:
Logic 1: When there is any movement within the room, the occupancy mode will likely be on.
Logic 2: When the main door is closed and opened, a flag will switch on for one minute to ascertain if there is movement in room. If no movement is detected after 1 minute, the program will activate energy-saving mode. This is valuable in situations each time a guest enters the room briefly. In energy-saving mode all lights are off aside from a nightlight, which stays on for 3 hours in case there is certainly another guest having a nap. Also, the AC will never be turned off, however its temperature will likely be decreased by 2 degrees. It will help save energy as time passes.
Logic 3: If the energy-saving mode is enabled without any movement is detected for longer than 3-5 hours, the nightlight and AC will likely be switched off automatically. It is also easy to define lower temperature levels for the AC. In addition, the Energy Servant can change the AC on/off if it understands that a balcony window/door is open. All this requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The sunshine harvest sensor helps save energy by wscgid balcony lights off when there is enough sunlight.
Another practical and beneficial ability of this sensor is its built-in thermostat, which helps maintain the right temperature at all times. This will be significant to keep furniture fresh and intact. Also, in hot spots and even when the room is empty for a long period, humidity and bad smells is not going to become a problem in the room. This sensor could be developed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This could happen many times during the day if required. A comparable performance could be programmed in cold spots to stop mold.
Another option with this smart device is TV control. When the hotel offers the guest using a room tablet, she/he is able to control the room’s TV by using it. This sensor was placed in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and many satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the ability to meet both hotel owners and guests interests and needs with just a few items and in by far the most energy-efficient way possible. For additional information or to schedule a consultation, give us a call at www.tiscontrol.com