Fiber proof testers are designed to apply a set load to a fusion-spliced optical fiber to be able to test the effectiveness of the spliced fiber. Our fiber proof testers can be found in both linear and rotary designs, for both proof and tension testing. Fiber proof testers are available for single mode, multimode, and polarization-maintaining fibers. Choose from dedicated, standalone systems or multipurpose designs which can be also capable of stripping, cleaning, cleaving, splicing, and/or recoating.
Fiber Recoaters with Proof Testers offer easy, integrated solutions to Fiber drawing machine. The fiber recoating process restores the buffer coating to a stripped fiber, offering more flexibility than a heat-shrink protection sleeve, enabling so that it is handled and coiled without damaging the fusion-spliced section. The integrated linear or rotary proof tester allows users to instantly test a recoated fiber using a pre-determined load and figure out the long-term longevity of the fiber. Because of their capability to restore a fusion-spliced fiber to near original condition, these systems are best for applications like undersea optical fiber cables, submarine communication cabling, fiber lasers, or Distributed Bragg Reflector (DBR) lasers.
This process begins with the fusion-spliced section of fiber being placed in the middle of the mold assembly (see image off to the right). Once occur position, inserts within the fiber blocks secure the spliced fiber in place. Recoat material is pumped in to the cavity and after that UV-cured. The recoated fiber may then be tested by pulling onto it up to and including pre-determined load.
Recoater and Mold Assembly Options – Recoaters can be purchased with either an automated or manual mold assembly. The automated mold assembly features pneumatic charge of the mold plates and it is optimized for top-volume manufacturing applications. Manual mold assemblies, on the other hand, use hinged mold plates which provide more flexibility and are perfect for low-volume manufacturing or R&D applications. A computerized or manual volumetric dispensing pump and injection method is employed to inject the recoat material into the mold cavity.
The PTR208 automatic recoater comes standard having a mold assembly for FTTH cable production line; For the manual recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes separately so that customers can choose the right mold coating diameter for his or her application. Custom mold coating sizes can be found up to Ø900 µm. Pre-setting up the mold assembly in the factory is also available. Contact Tech Support for more information on custom molds or factory assembly.
Most fiber optic cables are made professionally and are made to work effectively for a long period. While this is the case it doesn’t imply that the units don’t develop problems. As with any other units, the cables develop problems and it’s your choice to identify and correct them. To assist you here are some of the most frequent fiber optic fiber problems:
External damage. Common external damages are splits and scratches on the units. The units are highly sensitive; therefore, even most minor damages have the capacity to prevent effective transfer of signals. In case you have noticed some defects on your units you need to replace them as quickly as possible.
The optic cable is just too long. Optic fibers can be found in various sizes and lengths and it’s your choice to choose the the one that is ideal for your application. In some instances, people install units which can be too long than needed. A cable that is certainly too much time are at the potential risk of winding around itself. A lengthy unit is also at the chance of bending or twisting. These actions often result in permanent damage to the optic fibers as well as its components. In order to avoid installing a bad scale of cable you need to take your time to swrwun a measuring tape and look at the distance that you are planning to cover.
Improperly installed connectors. Connectors join several cables and play a vital role in determining the effectiveness of the optic cables. It’s common for a few contractors to improperly install the cables resulting to cable problems. To correct the difficulties you need to hire a skilled contractor to install the cables properly.
Stretching. It’s an oversight to possess optic cables which can be too long. It’s another mistake to get cables that are too short since they are prone to stretching. As i have said, the cables are incredibly sensitive and even a minor damage can stop the cables from in working order. To prevent the cables from stretching you need to make sure that you install them at the right place. You need to avoid pulling the cable jacket during installation. The easiest way of going regarding it is using grips at the connectors.
Old age. The same as other things beneath the SZ stranding line get old. Old cables are not only ineffective in their working, additionally they tend to develop problems every now and then. As soon as your cables are old, the easiest way of fixing them is replacing them. We specialize to make machines that aid you in the making of fiber optic cables. We have Secondary coating line. We also have SZ stranding line and lots of other units. Visit the given links to learn more.